Quantcast
  • 产品中心 > 工业装配线及相关设备> 线体类别 > 总装线
     产品中心 /
  • Industry Dynamical Assembly Line

    工业装配线及相关设备
  • Packing Machine

    包装机
  • Intelligent Combination Electric Tightening Machine

    智能组合拧紧机
  • Industrial Air Tool

    工业级18luck平台
  • Rotary Table 转台
    ∷  转台
    Rotary Table
    主要构成
    由摩擦辊道、输送减速电机、转向减速电机(或转向气缸)、阻挡气缸、转向机构、限位传感器、罩壳等构成。
    主要功能
    在装配线转角变向处实现工件沿装配线运动方向的改变。
    动作过程
    工件到达转台处,转台上的辊道自动运行,阻挡气缸自动升起,工件到位后辊道停止运转。转向电机(或转向气缸)启动,通过齿轮机构实现转台的旋转运动,当到达预定转角位置后,转向电机停止,辊道输送电机启动,将工件输送到下一工位,最后转向电机反转,转台转回初始位置。转台的转动角速度及辊道的输送速度,可通过对应电机的变频器调节。转台的转角角度可通过调整限位传感器的位置调整。
    Rotary Table
    Main Components
    It is to make workpieces move along assembly line direction when they come to intersection angle or turning
    position.
    Main Function
    IIt is to make workpieces move along assembly line direction when they come to intersection angle or turning
    position.
    Process
    Roller bed on rotary table runs automatically when workpieces reach rotary table. Blocking cylinder ascends
    automatically too. After workpieces are in place, roller bed breaks down and steering motor starts. Rotary table is set in rotating motion by gear mechanism. Steering motor stops when workpieces reach intersection. Meanwhile,conveying motor starts to deliver workpieces to next station.Finally, steering motor reverses and rotary table switch back to original position. The turning speed of rotary speed and conveying speed of roller bed are adjusted by frequency converter of corresponding motor. The turning angle of rotary table is adjustable by regulating the limit sensor position.
    返回列表