Quantcast
  • 产品中心 > 智能组合拧紧机> 产品结构 > 操纵箱总成
     产品中心 /
  • Industry Dynamical Assembly Line

    工业装配线及相关设备
  • Packing Machine

    包装机
  • Intelligent Combination Electric Tightening Machine

    智能组合拧紧机
  • Industrial Air Tool

    工业级18luck平台
  • Classifications of Operation Box Assembly 操纵箱总成分类
    ∷  操纵箱总成分类
    Classifications of Operation Box Assembly
    按操作方式可分为卧式、立式、倾斜式及机床式等。
    卧式:拧紧轴输出动力成水平方向,特别适用于各种车辆轮胎螺栓的拧紧工位。
    立式:拧紧机悬于工位上方,有效节约工位空间,常应用于车桥U 型螺栓拧紧工位。

    按变位方式可分为手动及自动变位操纵箱。
    手动变位:中心距变位手柄转动拧紧轴变位丝杠,带动变位丝母拖动变位拖板沿底板导向槽移动,轻松可靠,中心距切换时间不超过60 秒。
    自动变位:气缸或伺服电机带动变位导套轻松实现中心距切换,变位时间不超过5 秒。
     
    按拧紧轴数可分为单轴、二轴、三轴、四轴….. 十八轴及多轴可变。
    Classifications of Operation Box Assembly
    There are horizontal type, vertical type, tilting type and machine tool type in operation mold.
    Horizontal type: Output Motive Power is in horizontal direction, suitable for tyre bolt tightening position of various vehicles.
    Vertical type: Tightening Machine is suspended above work position to save space, often applied in Axle U Bolt Tightening work position.

    It can be divided into hand and automatic shift according to shift type.
    Manual shift center distance : Center distance modification handle moves shift screw rod of tightening shaft, driving screw with thread to drag planker to move along guide slot of bottom plate. It is easy and reliable. Center distance modification time is less than 60 seconds.
    Automatic shift center distance: Cylinder or servo motor drives guide bushing to realize center distance modification within 5 seconds.
     
    It can be divided into single shaft,two shafts, three shafts, four shafts……. eighteen shafts and multiple shafts
    according to shaft quantity.
    返回列表