Quantcast
  • 产品中心 > 智能组合拧紧机> 产品结构 > 操纵箱总成
     产品中心 /
  • Industry Dynamical Assembly Line

    工业装配线及相关设备
  • Packing Machine

    包装机
  • Intelligent Combination Electric Tightening Machine

    智能组合拧紧机
  • Industrial Air Tool

    工业级18luck平台
  • Applicable Torque Value of Bolts 螺栓适应扭矩值
    ∷  螺栓适应扭矩值
    Applicable Torque Value of Bolts
    下表显示的是对绝大多数的常规螺丝拧紧时,建议采用的扭矩值。对于未经处理的浸油螺丝(摩擦系数=0.125)进行操作时,推荐采用大拧紧扭矩(N.m)。公用粗牙螺纹,扭矩对应大致62% 的拉伸载荷。
    Applicable Torque Value of Bolts
    The following table shows suggested torque value for general bolt and screw tightening. Maximum torque is suggested to adopt for operating immersion oil screw (friction coefficient=0.125) without treatment.
    返回列表